The incoming 23.65 m2 expanded to 25.05 m2 to the production office, and the space could meet the packaging operation. Die-cutting area: Change to Production Office, Due to the demand of diffusion capacity in the current die-cutting area, There is not enough space, The position needs to be readjusted, Auxiliary silo: The raw and auxiliary material silo is completely transformed into a fire-fighting passage, Set aside an area for transformation in SMT, as shown in Figure 8. Automatic first line: half assembly cable and south extension machine area, inner packaging area is transformed, assembly cable can be changed to automatic second line operation arrangement mode, i.e. Moving and adjusting cable spacing, inner packaging area adjusted to 6 6SMT part area is changed to auxiliary material bin (Figure, area can be used for production; 3.1 The die-cutting area is being expanded, and the number of die-cutting equipment to be applied for in the required area shall be determined, and the position adjustment shall be evaluated again. 3.2 Tuonan Film Sticking Machine suggests that the application should be transferred to ATV Headquarters by Manager Li of ATV Equipment Department. 3.3 The position of SMT's door will be readjusted as shown in the figure. There will be one automatic line and six manual lines, which will be one less manual line than the original arrangement. The length, width and height of fire engines are a decisive factor affecting the traffic capacity of fire lanes. Generally, the length of fire engines is greater than or close to 10m, the height is nearly 4m, and the width is nearly 2.5 m. Article 6.0. 2 of the "Construction Regulations" stipulates that the clear height and width of fire lanes passing through buildings shall not be less than 4m, which is determined according to the external dimensions of various fire vehicles used in China. Considering that the speed of fire engines is generally faster, a certain safety factor should be ensured on the width when passing through buildings to facilitate the fast speed of vehicles.Schedule), indicating when and how often the event starts, and the second part is the event action内夫·凯利死了。她陷入了困境，必须找出是谁杀了她。这部改编自《Beau Séjour》的神秘系列剧给人留下了深刻印象，因为它的演员阵容年轻，英格兰湖区的风景令人叹为观止。After her mother died, Li Lei always blamed herself and knew clearly that her life was not good alone. Why didn't she take her to Shanghai more strongly and why didn't she take her over earlier to see a doctor?首都国际机场空中管制塔台。主任刘鸣飞和年轻的管制员们突遇飞机事故紧急迫降，他们临危不乱，从容指挥，化险为夷。虽然没有发生危险，但刘鸣飞痛感空管工作的整体水平急待提高。刘鸣飞的父亲在美有产业，妻子陈思是国航空姐，希望刘鸣飞去美继承产业，此时一位神秘女人??宁润出现在他们之中，宁对刘鸣飞表现出很大兴趣，陈思很不高兴。几次偶然事件，使刘鸣飞对妻子有口难辨。陈思撇下孩子，刘顾此失彼，首尾难顾。刘鸣飞的手下也不安静，管制员曹东旭与西南航空公司空姐孟莲相爱。但由于工作却难以团聚，于伟华的女友小花嫌小于收入低而移情他人，致使于伟华精神恍惚，险些在工作中酿成大错而被撤销上岗资格，业务骨干李洪翼也因寂寞难耐想辞职下海。在威严、孤独的塔台，做为时代骄子的管制员们在生活中也有许多烦恼。刘鸣飞赴美学习，成绩优异，关向父亲表明了自己服务祖国的愿望并得到父亲理解支持。陈思终因和刘鸣飞志向不同而凄然分手，刘鸣飞痛苦万分……For the operation and maintenance phase, BIM technology can be used to realize virtual reality, asset statistics, space management, building system analysis and disaster emergency simulation. BIM model can improve the efficiency of operation and maintenance, reduce costs, improve the service life of subway and avoid operation and maintenance risks.文豪・谷崎潤一郎の名作『細雪』に描かれた四姉妹の物語を、バブル崩壊後の現代に置き換え、連続ドラマとして描く『平成細雪』が、NHK・BSプレミアムで来年1月7日より放送される（毎週日曜 後10：00、全4回）。四姉妹を演じるのは、中山美穂、高岡早紀、伊藤歩、中村ゆり。脚本は岸田國士戯曲賞・鶴屋南北戯曲賞受賞の蓬莱竜太氏が担当する。
